Delivery across all Ukraine
Quality assurance
Return within 14 days
is available
Packages Quartz-grunt Nanofarb: 1.4 kg, 4.2 kg, 7 kg, 14 kg.
It is used as an adhesive intermediate coat before the subsequent application of structural (decorative) plasters and paints. It has protective functions in facade insulation systems. It is suitable for indoor and outdoor priming of cement plasters, bricks, concrete, gypsum substrates.
The substrate should be dry, free from dust, grease stains and other contaminants. Heavily soiled surfaces should be cleaned with 3-5% baking soda solution, rinsed with water and dried and primed with Watergrunt deep penetration clearcole. Surfaces previously painted with oil paint or enamel must be cleaned of peeling coating, abraded to roughness and free of dust. Chalky whitewash should be completely removed. Irregularities, gouges and cracks should be leveled with acrylic filler. It is recommended to pre-treat the base to be painted with a penetrating water-dispersion acrylic primer TM Nanofarb, paint after 24 hours.
Stir Quartz-grunt thoroughly before use.
Apply with a brush, textured roller, spatula, brush in one layer. It is recommended to dilute the primer with water no more than 10% by volume. Drying time 24 hours at a temperature of +20 ° C and humidity not more than 50%. Works should be carried out at an ambient and base temperature not lower than +5 ° C and not higher than +30 ° C.
Attention!
The coating acquires its final durability after 24 hours.
Ltd "NanoFarb" recommends performing works at a substrate temperature from +7 ° C to +27 ° C and relative humidity up to 70%. The manufacturer is not responsible for the end result if the recommendations were ignored.
Store Quartz-grunt Nanofarb in its original packaging, with a seal on the container and in rooms with a constant temperature from +5 ° C to +30 ° C. Shelf life - 24 months from the date of manufacture indicated on the package. Do not expose to freezing and direct sunlight. Keep out of the reach of children.
The manufacturer guarantees that Quartz-grunt Nanofarb adhesive clearcole complies with the specified technical characteristics if all the above rules are followed.
The manufacturer is not responsible for non-compliance with the above rules, as well as for non-compliance with the prescribed technical rules for the result of the work performed. You can consult our phone manager on the use of Quartz-grunt Nanofarb.
Also, a store employee will help you to place an order and introduce you to the terms of delivery. You can buy Quartz-grunt Nanofarb in one click in our online store with delivery throughout Ukraine.
Information about Quartz-grunt Nanofarb can be obtained on the website, as well as you can buy this product at the best price in Ukraine on the website. You can place an order with the manager by phone or through the site basket.
