Delivery across all Ukraine
Quality assurance
Return within 14 days
is available
Packages of Waterstop Nanofarb: 0.5 l, 1 l, 3 l, 5 l, 10 l
Is should be used only diluted. The primer is intended for strengthening easily crumbling and chalking surfaces, as well as for works on intensively absorbent mineral substrates: concrete, brick, plaster, wood, cement, gypsum, plasterboard, fiberboard (hardboard), chipboard. It is used for subsequent painting with water-dispersive materials inside and outside the premises. In addition, it can be used as an additive in various dry cement mixtures.
Surface preparation.
The substrate should be dry, free of dust, grease stains and other contaminants. Heavily contaminated surfaces should be cleaned with 3-5% baking soda solution, rinsed with water and dried. Clean surfaces previously painted with oil paint or enamel. Chalky whitewash should be completely removed.
Apply the primer with a brush or roller, avoiding accumulations on the surface. Drying time of the primer is up to 2 hours, depending on temperature, air humidity, primer consumption and absorbency of the substrate. Highly absorbent substrates, such as aerated concrete, are recommended to be primed at least twice. The second layer of primer is applied after the first one has completely dried. Fresh remains of the primer can be removed with water, dried - only with a solvent.
Ltd “Nano Farb" recommends performing works at a substrate temperature of +7 ° C to +27 ° C and relative humidity up to 70%. The manufacturer is not responsible for the end result if the recommendations were ignored.
Store Waterstop Nanofarb in its original packaging, with a seal on the container and in rooms with a constant temperature from +5 ° C to +30 ° C. Shelf life - 24 months from the date of manufacture indicated on the package. Do not expose to freezing and direct sunlight. Keep out of the reach of children.
The manufacturer guarantees compliance of the Waterstop Nanofarb primer-concentrate according to the specified technical characteristics if all the above rules are followed. The manufacturer is not responsible for non-compliance with the above rules, as well as for non-compliance with the prescribed technical rules for the result of the work performed. You can consult our phone manager on the use of Waterstop Nanofarb.
Also, a store employee will help you to place an order and introduce you to the delivery terms. You can buy Waterstop Nanofarb in one click in our online store with delivery throughout Ukraine. Information about Waterstop Nanofarb can be obtained on the website, as well as you can buy this product at the best price in Ukraine on the website. You can place an order with the manager by phone or through the site basket.
