Surface preparation.
The surface to be painted must be dry, free from dust, grease stains and other contaminants. Heavily contaminated surfaces should be cleaned with 3-5% baking soda solution, rinsed with water and dried and primed with Watergrunt. Surfaces previously painted with oil paint or enamel must be cleaned of peeling coating, abraded to roughness and cleaned of dust. Chalky whitewash should be completely removed. Irregularities, gouges and cracks should be smoothed out with acrylic filler.
It is recommended to pre-treat the base to be painted with a penetrating water-dispersion acrylic primer TM Nanofarb, paint after 24 hours.

Application.
Stir well before using Gloss Aqua Nanofarb.
 

Using Gloss Aqua Nanofarb (white).

Apply by roller, brush or spray (including airless) in two coats. For priming the base, it is recommended to dilute the paint with water no more than 10% by volume. The drying time of the first layer is 2-3 hours at a temperature of +20 ° C and humidity not more than 50%.

Apply the second coat without diluting. Works should be carried out at an ambient and base temperature not lower than +5 ° C and not higher than +30 ° C. Apply the second layer of paint 2-3 hours after applying the first.

Attention!

The coating acquires its final color after the enamel has dried. The coating acquires final resistance to wet cleaning in 3-4 weeks.

Colour: white

Note.

Ltd "NanoFarb" recommends performing works at a substrate temperature from +7 ° C to +27 ° C and relative humidity up to 70%. The manufacturer is not responsible for the end result if the recommendations were ignored.

Storage.

Store Gloss Aqua Nanofarb in its original packaging, with a seal on the container and in rooms with a constant temperature from +5 ° C to +30 ° C. Shelf life - 24 months from the date of manufacture indicated on the package. Do not expose to freezing and direct sunlight. Keep out of the reach of children.

Technical specifications.

Density 1.25 kg / l

Composition Water dispersion of styrene-acrylic resin with mineral fillers

Substrate temperature during application from +7 ° C to +27 ° C

Content of non-volatile substances (140 ° C). Not less than 65%

PH level 8.0-8.5

Consumption 1 l to 12 sq.m

Warranty.

The manufacturer guarantees the compliance of Gloss Aqua Nanofarb acrylic enamel with the specified technical characteristics if all the above rules are followed.

The manufacturer is not responsible for non-compliance with the above rules, as well as for non-compliance with the prescribed technical rules for the result of the work performed.

You can consult our manager by phone on how to use Gloss Aqua Nanofarb. Also, a store employee will help you to place an order and introduce you to the terms of delivery. You can buy Gloss Aqua Nanofarb in one click in our online store with delivery throughout Ukraine.

Information about Gloss Aqua Nanofarb can be obtained on the website, as well as you can buy this product at the best price in Ukraine on the website. You can place an order with the manager by phone or through the site basket.