Delivery across all Ukraine
Quality assurance
Return within 14 days
is available
Packages of Acrylux Nanofarb (Base A): 1 l, 2.5 l, 10 l
Packages of Acrylux Nanofarb (Base C): 9 l
It is recommended for use on new or previously painted mineral substrates with water-dispersion paints - concrete, silicate brick, putty or plastered surfaces, as well as plasterboard, wood, fiberglass, etc. in rooms with high humidity and where frequent wet cleaning is required: residential buildings and offices, educational institutions, kitchens, corridors, public spaces, garages, workshops, stairwells.
The surface to be painted must be dry, free from dust, grease stains and other contaminants. Heavily contaminated surfaces should be cleaned with 3-5% baking soda solution, rinsed with water and dried and primed with Watergrunt. Surfaces previously painted with oil paint or enamel must be cleaned of peeling coating, abraded to roughness and free of dust.
Chalky whitewash should be completely removed. Irregularities, gouges and cracks should be leveled with acrylic filler. It is recommended to pre-treat the painted base with a penetrating water-dispersion acrylic primer TM Nanofarb, paint after 24 hours.
Stir Acrylux Nanofarb thoroughly before use.
Apply by roller, brush or spray (including airless) in two coats. For priming the base, it is recommended to dilute the paint with water no more than 10% by volume. The drying time of the first layer is 2-3 hours at a temperature of +20 ° C and humidity not more than 50%. Apply the second coat without diluting. Works should be carried out at ambient and substrate temperatures not lower than +5 ° C and not higher than +30 ° C.
Apply the second layer of paint 2-3 hours after applying the first one.
Attention! The coating acquires its final color after the paint has dried. The final resistance to wet cleaning with the use of detergents acquires after 3-4 weeks.
Ltd "Nano Farb" recommends performing work at a substrate temperature of +7 ° C to +27 ° C and relative humidity up to 70%. The manufacturer is not responsible for the end result if the recommendations were ignored.
Store Acrylux Nanofarb in its original packaging, with a seal on the container and in rooms with a constant temperature from +5 ° C to +30 ° C. Shelf life - 24 months from the date of manufacture indicated on the package. Do not expose to freezing and direct sunlight. Keep out of the reach of children.
The manufacturer guarantees the compliance of Acrylux Nanofarb interior acrylic silky-matte paint according to the specified technical characteristics, provided that all the above rules are followed.
The manufacturer is not responsible for non-compliance with the above rules, as well as for non-compliance with the prescribed technical rules for the result of the work performed.
You can consult our phone manager on the use of Acrylux Nanofarb. Also, a store employee will help you to place an order and introduce you to the terms of delivery. You can buy Acrylux Nanofarb in one click in our online store with delivery throughout Ukraine.
Information about Acrylux Nanofarb can be obtained on the website, as well as you can buy this product at the best price in Ukraine on the website. You can place an order with the manager by phone or through the site basket.
