Chat with us, powered by LiveChat
+38(095)7887799
  • +38(095)7887799

Mattlatex Nanofarb - latex matte water-dispersion washable paint for ceilings and walls 7 kg

1 2 3 4 5
Ser number 4820198590475

858 uah.

($21.87, € 20,22)

Delivery across all Ukraine

Nova Poshta, Delivery

Quality assurance

All products are certified

Return within 14 days

All goods are subject to the law of Ukraine '' On Protection of Consumer Rights"

Mattlatex Nanofarb - latex matte water-dispersion washable paint for ceilings and walls

Packages Mattlatex Nanofarb (Base A): 1.4 kg, 4.2 kg, 7 kg, 14 kg

Packages Mattlatex Nanofarb (Base C): 11 kg

PROPERTIES:

  • Matte paint for ceilings and walls, snow-white, resistant to wet cleaning with detergents.
  • It covers well and it is easy to apply.
  • 3000 wet scrubbing cycles
  • Wet abrasion resistance: Grade 3
  • Contrast Ratio (Base A - White): Grade 3.
  • Surface coverage rate with material: 1 kg to 8 m2 for a single layer coating.
  • After drying, it forms a uniform coating that is resistant to wet cleaning with the use of  detergents
  • Vapor permeable.
  • Mattlatex Nanofarb is tinted according to the Orange Color System.
  • Consumption: 1kg to 8 m2 per layer. Paint consumption depends on the type and surface preparation.
  • It has high adhesion (adhesion to the base), easy to apply, good coverage.
  • It dries quickly. The coating acquires final resistance to wet cleaning with the use of detergents in 3-4 weeks.
  • Mattlatex Nanofarb is used for painting ceilings and walls inside residential and office buildings. For interior work. 
  • CLASSIFICATION ACCORDING TO DSTU EN 13300: 2012

APPLICATION AREA:

It is applied on new or previously painted mineral substrates with water-dispersion paints - concrete, silicate bricks, putty or plastered surfaces, as well as drywall, wood, fiberglass, etc.

Surface preparation.

The foundation to be painted must be dry, free from dust, grease stains and other contaminants. Heavily soiled surfaces should be cleaned with 3-5% baking soda solution, rinsed with water and dried and primed with Watergrunt deep penetration primer. Surfaces, previously painted with oil paint or enamel, must be cleaned of peeling coating, abraded to roughness and free of dust. Chalky whitewash should be completely removed. Roughness, dents and cracks should be smoothed out with acrylic filler. It is recommended to pre-treat the painted base with a penetrating water-dispersion acrylic primer TM Nanofarb. Paint after 24 hours.

Application.

Stir Mattlatex Nanofarb thoroughly before use.

Using Mattlatex Nanofarb (white).

Apply by roller, brush or spray (including airless) in two coats. For priming the base, it is recommended to dilute the paint with water no more than 10% by volume.

The drying time of the first layer is 2-3 hours at a temperature of +20 ° C and humidity not more than 50%.

Apply the second coat without diluting. Works should be carried out at ambient and substrate temperatures not lower than +5 ° C and not higher than +30 ° C. Apply the second layer of paint 2-3 hours after applying the first one.

Attention!

The coating acquires its final color after the paint has dried. The final resistance to wet cleaning with the use of detergents acquires after 3-4 weeks.

Colour: white

Note.

Ltd "NanoFarb" recommends performing work at a substrate temperature from +7 ° C to +27 ° C and relative humidity up to 70%. The manufacturer is not responsible for the end result if the recommendations were ignored.

Storage.

Store Mattlatex Nanofarb in its original packaging, with a seal on the container and in rooms with a constant temperature from +5 ° C to +30 ° C. Shelf life - 24 months from the date of manufacture indicated on the package. Do not expose to freezing and direct sunlight. Keep out of the reach of children.

Technical specifications.

  • Density 1.5 kg / l
  • Composition Water dispersion of styrene-acrylic resin with mineral fillers
  • Substrate temperature during application +7 ° C to +27 ° C
  • Content of non-volatile substances (140 ° C).
  • Not less than 65%
  • PH level 8.0-8.5 
  • Consumption 1 kg up to 8 sq.m

Warranty.

The manufacturer guarantees the compliance of Mattlatex Nanofarb interior acrylic paint with the specified technical characteristics if all the above rules are followed.

The manufacturer is not responsible for non-compliance with the above rules, as well as for non-compliance with the prescribed technical rules for the result of the work performed.

You can consult our phone manager on the use of Mattlatex Nanofarb. Also, a store employee will help you place an order and introduce you to the terms of delivery. You can buy Mattlatex Nanofarb in one click in our online store with delivery throughout Ukraine. Information about Mattlatex Nanofarb can be obtained on the website, as well as you can buy this product at the best price in Ukraine on the website. You can place an order with the manager by phone or through the site basket.

Калькулятор расхода

0 kg.