Chat with us, powered by LiveChat
+38(095)7887799
  • +38(095)7887799

Stone Lack Nanofarb — acrylic glossy stone varnish, 2.5 l

1 2 3 4 5
Ser number 4820198590802

544 uah.

($12.99, € 12,50)

Delivery across all Ukraine

Nova Poshta, Delivery

Quality assurance

All products are certified

Return within 14 days

All goods are subject to the law of Ukraine '' On Protection of Consumer Rights"

Stone Lack Nanofarb - acrylic glossy stone varnish

Packages: 1 l, 2.5 l, 10 l

PROPERTIES:

  • It creates the effect of a wet stone
  • Glossy varnish
  • Highly wearproof
  • Oudorless
  • Hydrophobic
  • Stone Lack Nanofarb is tinted according to the Orange Color System.
  • Consumption: 1l to 10 m2 per layer. Varnish consumption depends on the type and surface preparation.
  • Has high adhesion (adhesion to the base), it is easy to apply and covers well.
  • It dries quickly.
  • The coating acquires final resistance to wet cleaning in 3-4 weeks.
  • Stone Lack Nanofarb is used for interior and exterior use. CLASSIFICATION ACCORDING TO DSTU EN 13300: 2012

APPLICATION AREA:

STONE LACK Nanofarb is intended for protective and decorative coating of bricks, artificial and natural decorative stones, concrete, tiles, clinker, limestone, as well as decorative plasters based on marble chips, indoors and outdoors. The varnish is designed to give surfaces moisture, wear and dirt resistance. Especially recommended for machining plinths.

Surface preparation.

The foundation to be painted must be dry, free from dust, grease stains and other contaminants. Heavily soiled surfaces should be cleaned with 3-5% baking soda solution, rinsed with water and dried and primed with Watergrunt deep penetration primer. Surfaces, previously painted with oil paint or enamel, must be cleaned of peeling coating, abraded to roughness and free of dust.  Chalky whitewash should be completely removed. Roughness, dents and cracks should be smoothed out with acrylic filler.  It is recommended to pre-treat the painted base with a penetrating water-dispersion acrylic primer TM Nanofarb. Paint after 24 hours.

Application.

Stir well before using Lack Aqua Nanofarb.

Using Lack Aqua Nanofarb (transparent).

Apply by roller, brush or spray (including airless) in two coats. For priming the base, it is recommended to dilute the varnish with water no more than 10% by volume.

The drying time of the first layer is 2-3 hours at a temperature of +20 ° C and humidity no more than 50%.

Apply the second coat without diluting.

Works should be carried out at an ambient and base temperature not lower than +5 ° C and not higher than +30 ° C. Apply the second layer of varnish 2-3 hours after applying the first one.

Attention!

The coating acquires its final color after the varnish has dried. The coating acquires final resistance to wet cleaning in 3-4 weeks.

Colour: transparent

Note.

Ltd “NanoFarb” recommends performing work at a substrate temperature from  +7 ° C to +27 ° C and relative humidity up to 70%. The manufacturer is not responsible for the end result, if the recommendations were ignored.  

Storage.

Store Lack Aqua Nanofarb in its original packaging, with a seal on the container and in rooms with a constant temperature from +5 ° C to +30 ° C. Shelf life - 24 months from the date of manufacture indicated on the package. Do not expose to freezing and direct sunlight. Keep out of the reach of children.

Technical specifications.

  • Density 1.5 kg / l
  • Composition Acrylic, polymeric acrylate dispersion, functional additives.
  • Substrate temperature during application from +7 ° C to +27 ° C
  • Content of non-volatile substances (140 ° C).
  • Not less than 65%
  • PH level 8.0-8.5
  • Consumption 1 l up to 10 sq.m

Warranty.

The manufacturer guarantees the compliance of Stone Lack Nanofarb acrylic stone varnish with the specified technical characteristics if all the above rules are followed.

The manufacturer is not responsible for non-compliance with the above rules, as well as for non-compliance with the prescribed technical rules for the result of the work performed.

You can consult our phone manager on the use of Stone Lack Nanofarb. Also, a store employee will help you to place an order and introduce you to the delivery terms.

You can buy Stone Lack Nanofarb in one click in our online store with delivery throughout Ukraine. Information about Stone Lack Nanofarb Nanofarb can be obtained on the website, as well as you can buy this product at the best price in Ukraine on the website. You can place an order with the manager by phone or through the site basket.

Калькулятор расхода

0 kg.