Chat with us, powered by LiveChat
+38(095)7887799
  • +38(095)7887799

PVA Nanofarb — Universal adhesive for construction works, 1 kg

1 2 3 4 5
Ser number 4820198592660

121 uah.

($3.09, € 2,86)

Delivery across all Ukraine

Nova Poshta, Delivery

Quality assurance

All products are certified

Return within 14 days

All goods are subject to the law of Ukraine '' On Protection of Consumer Rights"

PVA adhesive Nanofarb - universal adhesive for construction works

Packing: 1 kg, 3 kg, 5 kg, 10 kg.

PROPERTIES:

  • High-strength universal PVA adhesive.
  • Ready to use.
  • It is used as an additive in cement mortars.
  • It sets quickly.
  • Ideal for children's creativity, decoupage and handmade design solutions.
  • Water diluting, odorless
  • Consumption: 1kg to 7 m2 per layer.
  • CLASSIFICATION ACCORDING TO DSTU EN 13300: 2012

APPLICATION AREA:

Paper, cardboard, leather, fabrics, wallpaper, wood. Designed for gluing wooden surfaces, paper and cardboard, used as an additive in cement mortars, environmentally friendly and frost-resistant.

 

Surface preparation.

Before gluing, the substrate must be dry, free from dust, grease stains and other contaminants. Heavily contaminated surfaces should be cleaned with 3-5% baking soda solution, rinsed with water and dried and primed with Watergrunt.

Surfaces previously painted with oil paint or enamel must be cleaned of peeling coating, abraded to roughness and free of dust. Chalky whitewash should be completely removed. Irregularities, gouges and cracks should be leveled with acrylic filler.

Application.

Stir well before using PVA Nanofarb.

Apply a thin layer on one of the glued surfaces at the temperature of the glue, ambient air and base above + 10 ° C. When added to chalk and gypsum solutions, the glue is mixed with water, which is used to prepare the solutions.

Chalk whitewash: 1: 10–1: 20 Plaster, putty: 1–5 mm thick - 1: 5, 5–20 mm thick - 1:10.

Using PVA Nanofarb.

Apply with a roller, brush. DO NOT DILUTE WITH WATER! Paper, cardboard - 3 min. Wood, fabrics, leather - 5-6 hours at a temperature of + 20 ° C and a relative humidity of 80%. The glued wood is ready for use in 24 hours.

Attention!

Do not dilute with water!

Color: white, transparent when it dries!

Note.

Ltd "Nano Farb" recommends performing work at a substrate temperature of from +7 ° C to +27 ° C and relative humidity up to 70%. The manufacturer is not responsible for the end result if the recommendations were ignored.

Storage.

Store PVA Nanofarb in its original packaging, with a seal on the container and in rooms with a constant temperature from +5 ° C to +30 ° C. Shelf life - 24 months from the date of manufacture indicated on the package. Do not expose to freezing and direct sunlight. Keep out of the reach of children.

Technical specifications.

  • Composition PVA dispersion, water, modified additives.
  • Substrate temperature during application from +7 ° C to +27 ° C
  • Content of non-volatile substances (140 ° C). Not less than 65%
  • PH level 8.0-8.5
  • Consumption 1 kg up to 7 sq.m

Warranty.

The manufacturer guarantees the compliance of acrylic building glue PVA Nanofarb with the specified technical characteristics if all the above rules are followed.

The manufacturer is not responsible for non-compliance with the above rules, as well as for non-compliance with the prescribed technical rules for the result of the work performed. You can consult our phone manager on the use of PVA Nanofarb.

Also, a store employee will help you to place an order and introduce you to the delivery terms. You can buy PVA Nanofarb in one click in our online store with delivery throughout Ukraine. Information about PVA Nanofarb can be obtained on the website, as well as you can buy this product at the best price in Ukraine on the website. You can place an order with the manager by phone or through the site basket.

Калькулятор расхода

0 kg.