Chat with us, powered by LiveChat
+38(095)7887799
  • +38(095)7887799

Hydroplast Nanofarb — single-component water seal mastic, 7 kg

1 2 3 4 5
Ser number 4820198591328

1 365 uah.

($34.47, € 32,29)

Delivery across all Ukraine

Nova Poshta, Delivery

Quality assurance

All products are certified

Return within 14 days

All goods are subject to the law of Ukraine '' On Protection of Consumer Rights"

Hydroplast Nanofarb - single-component water seal mastic

Packages: 1.4 kg, 4.2 kg, 7 kg, 14 kg

PROPERTIES: 

  • Water seal mastic for interior and exterior use. 

  • Ready to use  

  • Suitable for underfloor heating systems, pools, balconies and terraces  

  • Does not lose elasticity during operation 

  • The primer film has good flexural elasticity and high tensile strength. 

  • Surface coverage rate with material: 0.8-1 kg / m2 for a single layer coating. 

  • Reliably protects against water leaks. 

  • Hydroplast Nanofarb is tinted according to the Orange Color System. 

  • Consumption: 0.8-1 kg / m2 per layer. The consumption of the mastic depends on the type and preparation of the surface. 

  • It dries fast and it is easy to apply  

  • Hydroplast Nanofarb is used for waterproofing floor and wall coverings in wet and damp areas.  

  • For indoor and outdoor use. 

  • CLASSIFICATION ACCORDING TO DSTU EN 13300: 2012

APPLICATION AREA:

Ready-to-use water seal mastic for waterproofing floor and wall coverings in damp and wet rooms, as well as outdoors before tiling. It is used on objects that are constantly exposed to water stress, for waterproofing underground walls, foundations, swimming pools (not a topcoat), balconies, canopies, junctions of roofing and other structures, waterproofing hard-to-reach places (joints of large-panel houses, etc.), waterproofing bathroom rooms, between floor slabs, front and corner walls, baths, saunas and other rooms with high humidity.

Surface preparation.

The substrate must be dry, free of dust, grease stains and other contaminants. Heavily contaminated surfaces should be cleaned with 3-5% baking soda solution, rinsed with water and dried and primed with Watergrunt deep penetration primer. Surfaces previously painted with oil paint or enamel must be cleaned of peeling coating, abraded to roughness and free of dust. Chalky whitewash should be completely removed. Irregularities, gouges and cracks should be leveled with acrylic filler. It is recommended to pre-treat the base to be painted with a penetrating water-dispersion acrylic primer TM Nanofarb, paint after 24 hours.

Application.

Stir well before using Hydroplast Nanofarb.

Using Hydroplast Nanofarb (single-component).

Apply with a fur roller, spatula, brush in two layers. It is recommended to dilute the water seal with water no more than 10% by volume. The drying time of the first layer is 3-4 hours at a temperature of +20 ° C and humidity not more than 50%. Apply the second coat without diluting. Works should be carried out at an ambient and base temperature not lower than +5 ° C and not higher than +30 ° C. Apply the second layer of paint 3-4 hours after applying the first one. Attention! The coating acquires its final durability after 3-4 weeks.

Colour: white

Note.

Ltd "Nano Farb" recommends performing works at a substrate temperature from +7 ° C to +27 ° C and relative humidity up to 70%. The manufacturer is not responsible for the end result if the recommendations were ignored.

Storage.

Store Hydroplast Nanofarb in its original packaging, with a seal on the container and in rooms with a constant temperature from +5 ° C to +30 ° C - 24 months from the production date indicated on the package. Do not expose to freezing and direct sunlight. Keep out of the reach of children.

Technical specifications.

Density 1.43 kg / l

Composition water dispersion of the basic substance, thickeners, fillers, defoamers, plasticizers

Substrate temperature during application from +7 ° C to +27 ° C

Content of non-volatile substances (140 ° C).

Not less than 65%

PH level 8.0-8.5

Consumption 0.8 - 1 kg / sq.

Warranty.

The manufacturer guarantees that the Hydroplast Nanofarb water seal acrylic mastic complies with the specified technical characteristics if all the above rules are followed. The manufacturer is not responsible for non-compliance with the above rules, as well as for non-compliance with the prescribed technical rules for the result of the work performed. You can consult our phone manager on the use of Hydroplast Nanofarb. Also, a store employee will help you to place an order and introduce you to the delivery terms. You can buy Hydroplast Nanofarb in one click in our online store with delivery throughout Ukraine. Information about Hydroplast Nanofarb can be obtained on the website, as well as you can buy this product at the best price in Ukraine on the website. You can place an order with the manager by phone or through the site basket.

Калькулятор расхода

0 kg.