Delivery across all Ukraine
Quality assurance
Return within 14 days
is available
Packages: 1 l, 2.5 l, 10 l
STONE LACK Nanofarb is intended for protective and decorative coating of bricks, artificial and natural decorative stones, concrete, tiles, clinker, limestone, as well as decorative plasters based on marble chips, indoors and outdoors. The varnish is designed to give surfaces moisture, wear and dirt resistance. Especially recommended for machining plinths.
The foundation to be painted must be dry, free from dust, grease stains and other contaminants. Heavily soiled surfaces should be cleaned with 3-5% baking soda solution, rinsed with water and dried and primed with Watergrunt deep penetration primer. Surfaces, previously painted with oil paint or enamel, must be cleaned of peeling coating, abraded to roughness and free of dust. Chalky whitewash should be completely removed. Roughness, dents and cracks should be smoothed out with acrylic filler. It is recommended to pre-treat the painted base with a penetrating water-dispersion acrylic primer TM Nanofarb. Paint after 24 hours.
Stir well before using Lack Aqua Nanofarb.
Apply by roller, brush or spray (including airless) in two coats. For priming the base, it is recommended to dilute the varnish with water no more than 10% by volume.
The drying time of the first layer is 2-3 hours at a temperature of +20 ° C and humidity no more than 50%.
Apply the second coat without diluting.
Works should be carried out at an ambient and base temperature not lower than +5 ° C and not higher than +30 ° C. Apply the second layer of varnish 2-3 hours after applying the first one.
Attention!
The coating acquires its final color after the varnish has dried. The coating acquires final resistance to wet cleaning in 3-4 weeks.
Ltd “NanoFarb” recommends performing work at a substrate temperature from +7 ° C to +27 ° C and relative humidity up to 70%. The manufacturer is not responsible for the end result, if the recommendations were ignored.
Store Lack Aqua Nanofarb in its original packaging, with a seal on the container and in rooms with a constant temperature from +5 ° C to +30 ° C. Shelf life - 24 months from the date of manufacture indicated on the package. Do not expose to freezing and direct sunlight. Keep out of the reach of children.
The manufacturer guarantees the compliance of Stone Lack Nanofarb acrylic stone varnish with the specified technical characteristics if all the above rules are followed.
The manufacturer is not responsible for non-compliance with the above rules, as well as for non-compliance with the prescribed technical rules for the result of the work performed.
You can consult our phone manager on the use of Stone Lack Nanofarb. Also, a store employee will help you to place an order and introduce you to the delivery terms.
You can buy Stone Lack Nanofarb in one click in our online store with delivery throughout Ukraine. Information about Stone Lack Nanofarb Nanofarb can be obtained on the website, as well as you can buy this product at the best price in Ukraine on the website. You can place an order with the manager by phone or through the site basket.
