Delivery across all Ukraine
Quality assurance
Return within 14 days
is available
Packing Base (A): 2.5 l, 10 l
Packing Base (C): 9 l
It is recommended for use on new or previously painted mineral substrates with water-dispersion paints - concrete, sand-lime brick, putty or plastered surfaces, as well as drywall, wood, fiberglass, etc. In rooms with high humidity and where frequent wet cleaning is required: residential and office premises, educational institutions, kitchens, corridors, public spaces, garages, workshops, stairwells. Especially it is well suited for renovation or wood fiber wallpapers, embossed and embossed wallpapers and glass fabrics.
The surface to be painted must be dry, free from dust, grease stains and other contaminants. Heavily contaminated surfaces should be cleaned with 3-5% baking soda solution, rinsed with water and dried and primed with Watergrunt.
Surfaces previously painted with oil paint or enamel must be cleaned of peeling coating, abraded to roughness and free of dust. Chalky whitewash should be completely removed. Irregularities, dents and cracks should be smoothed out with acrylic filler. It is recommended to pre-treat the painted base with a penetrating water-dispersion acrylic primer TM Nanofarb, paint after 24 hours.
Stir Seidenlatex Nanofarb thoroughly before use.
Apply by roller, brush or spray (including airless) in two coats. For priming the base, it is recommended to dilute the paint with water no more than 10% by volume. The drying time of the first layer is 2-3 hours at a temperature of +20 ° C and humidity no more than 50%.
Apply the second coat without diluting. Works should be carried out at an ambient and base temperature not lower than +5 ° C and not higher than +30 ° C. Apply the second layer of paint 2-3 hours after applying the first one.
The coating acquires its final colour after the paint has dried. The final resistance to wet cleaning with the use of detergents acquires after 3-4 weeks.
Ltd “Nano Farb" recommends performing work at a substrate temperature of +7 ° C to +27 ° C and relative humidity up to 70%. The manufacturer is not responsible for the end result if the recommendations were ignored.
Store Seidenlatex Nanofarb in its original packaging, with a seal on the container and in rooms with a constant temperature from +5 ° C to +30 ° C. Shelf life - 24 months from the date of manufacture indicated on the package. Do not expose to freezing and direct sunlight. Keep out of the reach of children.
The manufacturer guarantees the compliance of Seidenlatex Nanofarb interior acrylic paint to the specified technical characteristics if all the above rules are followed.
The manufacturer is not responsible for non-compliance with the above rules, as well as for non-compliance with the prescribed technical rules for the result of the work performed. You can consult our phone manager on the use of Seidenlatex Nanofarb.
Also, a store employee will help you place an order and introduce you to the delivery terms. You can buy Seidenlatex Nanofarb in one click in our online store with delivery throughout Ukraine.
Information about Seidenlatex Nanofarb can be obtained on the website, as well as you can buy this product at the best price in Ukraine on the website. You can place an order with the manager by phone or through the site basket.
